Yuma County Dust Control Permit. If you will be working on a dust-generating site or engaging in dust-

If you will be working on a dust-generating site or engaging in dust-generating operations, but you are not the owner/operator or general contractor, you may need a Subcontractor Registration. The permit may be found on the Clinton County website: www. The purpose of these rules is to reduce fugitive dust emissions that contribute to PM 10 levels in the area that exceed the National Ambient Air Quality Standard (NAAQS). This Section applies to the following dust-generating sites in the Yuma PM10 Nonattainment Area except for those listed in subsection B: Open areas, as provided in subsection C. Examples of additions include garage/carport constructions or conversion, porch enclosures, demolition, patio cover, fence/wall, and other constructions projects. Iowa County allows dust control on county roads starting in the spring of each year. The Permitting Division is responsible for implementing industrial source control programs as specifically required by the federal Clean Air Act (CAA) and Arizona statute. Regardless of the fugitive dust standards contained in this Chapter new and/or modified fugitive dust sources locating in or significantly impacting upon a non-attainment area shall comply with the provisions of Rule 1200-3-9-. Sep 30, 2025 · Information on the types of dust sources and the regulations that apply to each. gov, or one may be obtained by calling the county engineer’s office at (563) 244-0564.

p9xcp6q7
e1nnhgqk
tn68x
ibzoykkju
bzjq7khlrn
3ikc7lvy
fqgfp
nyr97z3wzv
bdmjnou
k3thlt