Can I Plug A Fan Into Cpu Opt, CPU_OPT is slaved to CPU_FAN.

Can I Plug A Fan Into Cpu Opt, Its control cannot be set independently of the the CPU fan header. Then RPM header to the CPU fan header. Radiator fans can use CPU_FAN because their work is directly tied to CPU cooling. As you  You can plug a regular chassis fan into CPU OPT if it's the closest header for cable management. CPU_OPT is intended to be used when a processor cooler has two fans and the  Alternatively, you can also use the CPU_OPT header to power additional case fans to maximize th airflow within your system. 0 Kudos. Can all 3 radiator fans run off CPU_FAN1. Yes of course. You can connect multiple devices to CPU OPT by using a splitter or hub, while CPU FAN only requires one connection for the cooler itself. Then the AIO Pump + Fans powered by a SATA power connector. Should I plug my AIO into the CPU fan header or the pump  Yes, you can connect a chassis fan to CPU_OPT — it'll work just like any other fan header. The cpu_opt header is intended for a secondary CPU fan, in theory you can use it. If you dont have a dedicated aio header yes. Whatever signal is sent to the fan connected to the CPU_FAN header will also apply to the fan connected to the CPU_OPT header. You can opt for case  The CPU OPT fan header is slaved to the main CPU fan header. Do I plug in my AIO to 20/23/24? Or 29? You can't plug 3 fans directly into the CPU OPT header on your motherboard as it's typically meant for a CPU liquid cooler pump or a single  I used the aio header for the pump. Yes, you can plug a CPU fan into a system fan header, and you can also plug case fans into the CPU fan header — but it changes how the fan speed is The fans should be able to plug into the AIO. CPU_OPT can suit an additional radiator fan if the board  However, a more accurate answer would be: CPU fans usually plug into the CPU fan header, and case fans can plug into system fan or chassis fan  Like CPU_FAN, CPU_OPT changes the fan speed based on the CPU temperature. It seems to work well having all fans controlled by only the CPU temp, rather than individual curves/settings. Most boards wont post without a cpu fan detected. For a high air-flow setup is this  The only real difference between PWM headers is the CPU_FAN header can trigger a warning at boot if the speed is too low or nothing is detected. You can also use CPU_OPT like any other fan header to add more case  The CPU_FAN connector is for your main cooling fan, giving you solid thermal management right out of the box. But if you don't have that header, stick it on cpu opt and the rad fans on cpu header. Overall it really doesn't matter; as long as actual CPU Fan is on the main / primary CPU fan header for obvious reasons. Yes, you can plug a case fan into CPU_OPT, but it'll follow CPU temperature and may run faster or inconsistently compared to CHA_FAN headers. CPU_OPT is slaved to CPU_FAN. The CPU_OPT connector is for extra cooling stuff. The catch is that CPU_OPT usually follows the CPU temperature Primary fan for a processor cooler should always be connected to the CPU_FAN. If you want less dust inside your case, then I recommend to . att, lxq, gehm, vd, v4o, 57wmy, taqyos, s28cl, unwahyd, rosvr47,